Stef Mientki
2/14/2008 6:25:00 PM
Blubaugh, David A. wrote:
> Bill,
>
>
> Let me first say that my FPGA experiences are of the following nature:
>
> 1.) Developed control algorithms onto a FPGA that were utilized to
> control a switch-reluctance motor (three-phase as well six-phase).
>
> 2.) I am currently in the process of developing a specialized
> Multidimensional FFT processor that can be utilized to determine the
> frequency content and angle of arrival of a target via a linear sensor
> array.
>
> I believe that you are deeply mistaken about that I would be the only
> person to use such a system. The FPGA market will only increase as more
> embedded systems utilize more and more FPGAs for the processing needs,
> since embedded system are being task with more computationally intensive
> tasks, such as for example, image digital signal processing within
> portable digital cameras. Electrical and Computer Engineers could start
> to utilize SAGE for system programming and development, not just only
> mathematicians or physicists doing their own selected work.
>
> Also, I think that you may have the wrong idea of porting SAGE to be
> executed within a FPGA. What I had in mind was to have MyHDL embedded
> within SAGE, where sage could handle the graphical plot outputs of what
> is being generated by MyHDL. To be absolutely clear, SAGE could be used
> to handle the graphs for the simulation side of what the logic that is
> being generated by MyHDL embedded within the SAGE framework. This could
> help in testing algorithms as they are being generated into verilog FPGA
> logic, by having a graphical experience within the entire development
> process.
>
>
> If you have any more additional questions, please contact me as soon as
> possible.
>
>
Why not use LabView, it seems to have good FPGA support ?
cheers,
Stef