Asp Forum
Home
|
Login
|
Register
|
Search
Forums
>
perl.cpan.testers
FAIL pod2book-0.0.1 cygwin-thread-multi-64int 1.5.24(0.15642
chris
8/6/2007 2:24:00 PM
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers...
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear LUTETIUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.78. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Aug 6 14:22:33 2007] Trying to get '
http://www.cpan.org/authors/id/L/LU/LUTETIUS/pod2book-0.0.1.t...
[MSG] [Mon Aug 6 14:22:35 2007] Trying to get '
http://www.cpan.org/authors/id/L/LU/LUTETIUS/CHEC...
[MSG] [Mon Aug 6 14:22:35 2007] Checksum matches for 'pod2book-0.0.1.tar.gz'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/conf/'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/conf/test.tex'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/conf/test.yml'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/pod.t'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/perlcritic.t'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/10configure.t'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/00.load.t'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/t/pod-coverage.t'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/bin/'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/bin/pod2book'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/inc/'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/inc/Module/'
[MSG] [Mon Aug 6 14:22:35 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Can.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Base.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Win32.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/WriteAll.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/AutoInstall.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Build.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Makefile.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Scripts.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Fetch.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Include.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Metadata.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/Install.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/inc/Module/AutoInstall.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/lib/'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/lib/Pod/'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/lib/Pod/LaTeX/'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/lib/Pod/LaTeX/Book.pm'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/README'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/Changes'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/Build.PL'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/Makefile.PL'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/META.yml'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/examples/'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/examples/catalyst.yml'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/examples/frontmatter.tex'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/examples/preamble.tex'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/examples/copyright.tex'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book-0.0.1/MANIFEST'
[MSG] [Mon Aug 6 14:22:36 2007] Extracted 'pod2book' to '/home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1'
[MSG] [Mon Aug 6 14:22:37 2007] *** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- Test::More ...loaded. (0.7)
- Carp ...loaded. (1.04)
- Pod::LaTeX ...loaded. (0.58 >= 0.58)
- Config::Any ...missing.
- Params::Validate ...missing.
- Perl6::Slurp ...missing.
- Pod::ParseUtils ...loaded. (1.35 >= 1.33)
- Pod::Find ...loaded. (1.34 >= 1.34)
- Getopt::Long ...loaded. (2.36)
- Pod::Usage ...loaded. (1.35)
==> Auto-install the 3 mandatory module(s) from CPAN? [Y/n] y
*** Since we're running under CPANPLUS, I'll just let it take care
of the dependency's installation later.
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Warning: prerequisite Config::Any 0 not found.
Warning: prerequisite Params::Validate 0 not found.
Warning: prerequisite Perl6::Slurp 0 not found.
Writing Makefile for pod2book
[MSG] [Mon Aug 6 14:22:37 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 14:22:37 2007] Module 'pod2book' requires 'Config::Any' version '0' to be installed
[MSG] [Mon Aug 6 14:22:37 2007] Module 'pod2book' requires 'Params::Validate' version '0' to be installed
[MSG] [Mon Aug 6 14:22:37 2007] Module 'pod2book' requires 'Perl6::Slurp' version '0' to be installed
[MSG] [Mon Aug 6 14:22:37 2007] Trying to get '
http://www.cpan.org/authors/id/R/RA/RATAXIS/CHEC...
[MSG] [Mon Aug 6 14:22:38 2007] Checksum matches for 'Config-Any-0.07.tar.gz'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/Build.PL'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/Changes'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/General.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/INI.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/JSON.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/Perl.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/XML.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any/YAML.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/lib/Config/Any.pm'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/Makefile.PL'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/MANIFEST'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/META.yml'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/README'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/01-use.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/10-branches.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/20-parse.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/50-general.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/51-ini.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/52-json.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/53-perl.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/54-xml.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/55-yaml.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/61-features.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.conf'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.foo'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.ini'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.json'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.pl'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.xml'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf.yml'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/conf/conf2.ini'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/pod-coverage.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config-Any-0.07/t/pod.t'
[MSG] [Mon Aug 6 14:22:38 2007] Extracted 'Config::Any' to '/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07'
[MSG] [Mon Aug 6 14:22:39 2007] Writing Makefile for Config::Any
[MSG] [Mon Aug 6 14:22:39 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 14:22:46 2007] MAKE TEST passed: /home/chris/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-use..........ok
t/10-branches.....ok
t/20-parse........ok
36/54 skipped: various reasons
t/50-general......ok
2/2 skipped: various reasons
t/51-ini..........ok
9/9 skipped: various reasons
t/52-json.........ok
2/2 skipped: various reasons
t/53-perl.........ok
t/54-xml..........ok
2/2 skipped: various reasons
t/55-yaml.........ok
t/61-features.....ok
10/10 skipped: various reasons
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
all skipped: Test::Pod 1.14 required for testing POD
All tests successful, 2 tests and 61 subtests skipped.
Files=12, Tests=98, 5 wallclock secs ( 2.74 cusr + 2.05 csys = 4.79 CPU)
[MSG] [Mon Aug 6 14:22:46 2007] Ok, not sending test report
[MSG] [Mon Aug 6 14:22:46 2007] Trying to get '
http://www.cpan.org/authors/id/D/DR/DROLSKY/CHEC...
[MSG] [Mon Aug 6 14:22:48 2007] Checksum matches for 'Params-Validate-0.88.tar.gz'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/24-tied.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/13-taint.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/18-depends.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/with.pl'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/08-noop_with.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/22-overload-can-bug.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/10-noop_regex.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/03-attribute.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/defaults.pl'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/callbacks.pl'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/07-with.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/16-normalize.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/27-string-as-type.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/regex.pl'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/23-readonly.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/tests.pl'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/26-isa.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/12-noop_cb.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/05-noop_default.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/21-can.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/04-defaults.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/19-untaint.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/02-noop.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/25-undef-regex.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/01-validate.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/11-cb.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/15-case.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/17-callbacks.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/14-no_validate.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/06-options.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/t/09-regex.t'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/Changes'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Params/'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Params/ValidateXS.pm'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Params/ValidatePP.pm'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Params/Validate.pm'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Attribute/'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Attribute/Params/'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/lib/Attribute/Params/Validate.pm'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/MANIFEST'
[MSG] [Mon Aug 6 14:22:48 2007] Extracted 'Params-Validate-0.88/TODO'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params-Validate-0.88/META.yml'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params-Validate-0.88/ppport.h'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params-Validate-0.88/Validate.xs'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params-Validate-0.88/LICENSE'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params-Validate-0.88/Makefile.PL'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params-Validate-0.88/README'
[MSG] [Mon Aug 6 14:22:49 2007] Extracted 'Params::Validate' to '/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88'
[MSG] [Mon Aug 6 14:22:50 2007] Testing if you have a C compiler
Writing Makefile for Params::Validate
[MSG] [Mon Aug 6 14:22:50 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 14:22:57 2007] gcc -c -DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement -DUSEIMPORTLIB -O2 -DVERSION=\"0.88\" -DXS_VERSION=\"0.88\" "-I/home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE" Validate.c
Running Mkbootstrap for Params::Validate ()
chmod 644 Validate.bs
rm -f blib/arch/auto/Params/Validate/Validate.dll
ld2 -L/usr/local/lib Validate.o -o blib/arch/auto/Params/Validate/Validate.dll \
/home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE/libperl.dll.a \
gcc -shared -o Validate.dll -Wl,--out-implib=libValidate.dll.a -Wl,--export-all-symbols -Wl,--enable-auto-import -Wl,--stack,8388608 -Wl,--enable-auto-image-base \
-L/usr/local/lib Validate.o /home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int/CORE/libperl.dll.a
Creating library file: libValidate.dll.a
mv Validate.dll libValidate.dll.a blib/arch/auto/Params/Validate/
chmod 755 blib/arch/auto/Params/Validate/Validate.dll
cp Validate.bs blib/arch/auto/Params/Validate/Validate.bs
chmod 644 blib/arch/auto/Params/Validate/Validate.bs
[MSG] [Mon Aug 6 14:23:05 2007] MAKE TEST passed: /home/chris/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-validate............ok
t/02-noop................ok
t/03-attribute...........ok
t/04-defaults............ok
t/05-noop_default........ok
t/06-options.............ok
t/07-with................ok
t/08-noop_with...........ok
t/09-regex...............ok
t/10-noop_regex..........ok
t/11-cb..................ok
t/12-noop_cb.............ok
t/13-taint...............ok
t/14-no_validate.........ok
t/15-case................ok
t/16-normalize...........ok
t/17-callbacks...........ok
t/18-depends.............ok
t/19-untaint.............skipped
all skipped: These tests require Test::Taint 0.02+ to run
t/21-can.................ok
t/22-overload-can-bug....ok
t/23-readonly............skipped
all skipped: Need Readonly::XS and Readonly for this test
t/24-tied................ok
4/6 skipped: various reasons
t/25-undef-regex.........ok
t/26-isa.................ok
t/27-string-as-type......ok
All tests successful, 2 tests and 4 subtests skipped.
Files=26, Tests=504, 7 wallclock secs ( 3.64 cusr + 2.82 csys = 6.46 CPU)
[MSG] [Mon Aug 6 14:23:05 2007] Ok, not sending test report
[MSG] [Mon Aug 6 14:23:05 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/Perl6-Slurp-0.03.t...
[MSG] [Mon Aug 6 14:23:05 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/CHEC...
[MSG] [Mon Aug 6 14:23:13 2007] Checksum matches for 'Perl6-Slurp-0.03.tar.gz'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/Changes'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/Makefile.PL'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/MANIFEST'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/README'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/Slurp.pm'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/chomp.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/errors.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/filehandle.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/filename.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/ioderfile.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/iofile.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/ipc.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/irs.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/layers.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/lexfilehandle.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6-Slurp-0.03/t/string.t'
[MSG] [Mon Aug 6 14:23:13 2007] Extracted 'Perl6::Slurp' to '/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03'
[MSG] [Mon Aug 6 14:23:14 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Perl6::Export 0.07 not found.
Writing Makefile for Perl6::Slurp
[MSG] [Mon Aug 6 14:23:14 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 14:23:14 2007] Module 'Perl6::Slurp' requires 'Perl6::Export' version '0.07' to be installed
[MSG] [Mon Aug 6 14:23:14 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/Perl6-Export-0.07.t...
[MSG] [Mon Aug 6 14:23:14 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/CHEC...
[MSG] [Mon Aug 6 14:23:17 2007] Checksum matches for 'Perl6-Export-0.07.tar.gz'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/Changes'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/Export.pm'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/Makefile.PL'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/MANIFEST'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/README'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/t'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/t/1.t'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/t/lib'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6-Export-0.07/t/lib/TestModule.pm'
[MSG] [Mon Aug 6 14:23:17 2007] Extracted 'Perl6::Export' to '/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07'
[MSG] [Mon Aug 6 14:23:18 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Perl6::Export
[MSG] [Mon Aug 6 14:23:18 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 14:23:30 2007] Math::BigInt: couldn't load specified math lib(s), fallback to Math::BigInt::Calc at /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int/Win32API/File.pm line 20
cp Export.pm blib/lib/Perl6/Export.pm
[MSG] [Mon Aug 6 14:23:31 2007] MAKE TEST passed: /home/chris/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1....ok
All tests successful.
Files=1, Tests=5, 0 wallclock secs ( 0.25 cusr + 0.28 csys = 0.53 CPU)
[MSG] [Mon Aug 6 14:23:35 2007] Successfully sent 'pass' report for 'Perl6-Export-0.07'
[MSG] [Mon Aug 6 14:23:42 2007] Math::BigInt: couldn't load specified math lib(s), fallback to Math::BigInt::Calc at /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int/Win32API/File.pm line 20
cp Slurp.pm blib/lib/Perl6/Slurp.pm
[MSG] [Mon Aug 6 14:23:49 2007] MAKE TEST passed: /home/chris/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/chomp............ok
t/errors...........ok
t/filehandle.......ok
t/filename.........ok
t/ioderfile........ok
t/iofile...........ok
t/ipc..............ok
t/irs..............ok
t/layers...........ok
t/lexfilehandle....ok
t/string...........ok
All tests successful.
Files=11, Tests=171, 6 wallclock secs ( 2.80 cusr + 3.10 csys = 5.90 CPU)
[MSG] [Mon Aug 6 14:23:57 2007] Successfully sent 'pass' report for 'Perl6-Slurp-0.03'
[MSG] [Mon Aug 6 14:24:08 2007] /home/chris/perl588/bin/perl.exe "-Iinc" /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/Makefile.PL --config= --installdeps=Config::Any,0,Params::Validate,0,Perl6::Slurp,0
Math::BigInt: couldn't load specified math lib(s), fallback to Math::BigInt::Calc at /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int/Win32API/File.pm line 20
cp lib/Pod/LaTeX/Book.pm blib/lib/Pod/LaTeX/Book.pm
cp bin/pod2book blib/script/pod2book
/home/chris/perl588/bin/perl.exe "-Iinc" "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pod2book
[ERROR] [Mon Aug 6 14:24:15 2007] MAKE TEST failed: /home/chris/perl588/bin/perl.exe "-Iinc" /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/Makefile.PL --config= --installdeps=Config::Any,0,Params::Validate,0,Perl6::Slurp,0
/home/chris/perl588/bin/perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00.load.t t/10configure.t t/perlcritic.t t/pod-coverage.t t/pod.t
t/00.load.........# Testing Pod::LaTeX::Book 0.0.1
ok
t/10configure.....POD not found for Catalyst::Manual::Intro at /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/lib/Pod/LaTeX/Book.pm line 402
Pod::LaTeX::Book::parse('Pod::LaTeX::Book=HASH(0x1078e568)') called at t/10configure.t line 22
# Looks like you planned 4 tests but only ran 3.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 4
Failed 1/4 tests, 75.00% okay
t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/inc /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/lib /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/arch /home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib/lib /home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib/arch /home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib /home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/lib /home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/arch /home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib /home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib /home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch /home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib /home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib /home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch /home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib /home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib /home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/cygwin-thread-multi-64int /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at t/perlcritic.t line 3.
dubious
Test returned status 2 (wstat 512, 0x200)
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/10configure.t 255 65280 4 2 4
t/perlcritic.t 2 512 ?? ?? ??
2 tests skipped.
Failed 2/5 test scripts. 1/5 subtests failed.
Files=5, Tests=5, 4 wallclock secs ( 1.70 cusr + 1.65 csys = 3.35 CPU)
Failed 2/5 test programs. 1/5 subtests failed.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Test::Perl::Critic
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'LUTETIUS (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Test::Perl::Critic' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <
http://search.cpan.org/dist/ExtUtils-AutoIn...
may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Carp 1.04 0
Config::Any 0.07 0
Getopt::Long 2.36 0
Params::Validate 0.88 0
Perl6::Slurp 0.03 0
Pod::Find 1.34 1.34
Pod::LaTeX 0.58 0.58
Pod::ParseUtils 1.35 1.33
Pod::Usage 1.35 0
Test::More 0.70 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
COMSPEC = C:\WINDOWS\system32\cmd.exe
INCLUDE = C:\mingw\include;
LANG = C
LIB = C:\mingw\lib;
NUMBER_OF_PROCESSORS = 1
PATH = /usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/cygdrive/c/Perl/site/bin:/cygdrive/c/Perl/bin:/cygdrive/c/program files/imagemagick-6.3.1-q16:/cygdrive/c/MinGW/dmake:/cygdrive/c/MinGW/bin:/cygdrive/c/MinGW/tools:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/VideoLAN/VLC:/cygdrive/c/Program Files/Subversion/bin:/cygdrive/c/Program Files/Common Files/GTK/2.0/bin:/cygdrive/c/MinGW/GnuPG:/cygdrive/c/Program Files/jigl:/cygdrive/c/Program Files/QuickTime/QTSystem/:/cygdrive/c/Program Files/Haskell/bin:/cygdrive/c/ghc/ghc-6.6.1/bin
PERL5LIB = :/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Config-Any-0.07/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Params-Validate-0.88/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib:/home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/pod2book-0.0.1/blib
PERL5_CPANPLUS_IS_RUNNING = 5976
PERL5_CPANPLUS_IS_VERSION = 0.78
PERL_MM_USE_DEFAULT = 1
PROCESSOR_IDENTIFIER = x86 Family 15 Model 4 Stepping 8, AuthenticAMD
TERM = cygwin
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/chris/perl588/bin/perl.exe
UID: $< = 500
EUID: $> = 500
GID: $( = 513 545 544 513 0
EGID: $) = 513 545 544 513 0
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=cygwin, osvers=1.5.24(0.15642), archname=cygwin-thread-multi-64int
uname='cygwin_nt-5.2 lapster 1.5.24(0.15642) 2007-01-31 10:57 i686 cygwin '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement',
optimize='-O2',
cppflags='-DPERL_USE_SAFE_PUTENV -fno-strict-aliasing -pipe -Wdeclaration-after-statement'
ccversion='', gccversion='3.4.4 (cygming special, gdc 0.12, using dmd 0.125)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='ld2', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib /lib
libs=-lgdbm -ldl -lcrypt -lgdbm_compat
perllibs=-ldl -lcrypt -lgdbm_compat
libc=/usr/lib/libc.a, so=dll, useshrplib=true, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -L/usr/local/lib'
Servizio di avviso nuovi messaggi
Ricevi direttamente nella tua mail i nuovi messaggi per
FAIL pod2book-0.0.1 cygwin-thread-multi-64int 1.5.24(0.15642
Inserendo la tua e-mail nella casella sotto, riceverai un avviso tramite posta elettronica ogni volta che il motore di ricerca troverà un nuovo messaggio per te
Il servizio è completamente GRATUITO!
x
Login to ForumsZone
Login with Google
Login with E-Mail & Password