Asp Forum
Home
|
Login
|
Register
|
Search
Forums
>
perl.cpan.testers
FAIL pod2book-0.0.1 alpha-linux-thread-multi 2.6.16.19
chris
8/6/2007 12:55:00 PM
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers...
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear LUTETIUS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Aug 6 13:54:03 2007] Trying to get '
http://www.cpan.org/authors/id/L/LU/LUTETIUS/pod2book-0.0.1.t...
[MSG] [Mon Aug 6 13:54:04 2007] Trying to get '
http://www.cpan.org/authors/id/L/LU/LUTETIUS/CHEC...
[MSG] [Mon Aug 6 13:54:05 2007] Checksum matches for 'pod2book-0.0.1.tar.gz'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/conf/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/conf/test.tex'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/conf/test.yml'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/pod.t'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/perlcritic.t'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/10configure.t'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/00.load.t'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/t/pod-coverage.t'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/bin/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/bin/pod2book'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Can.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Base.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Win32.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/WriteAll.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/AutoInstall.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Build.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Makefile.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Scripts.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Fetch.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Include.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install/Metadata.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/Install.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/inc/Module/AutoInstall.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/lib/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/lib/Pod/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/lib/Pod/LaTeX/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/lib/Pod/LaTeX/Book.pm'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/README'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/Changes'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/Build.PL'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/Makefile.PL'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/META.yml'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/examples/'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/examples/catalyst.yml'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/examples/frontmatter.tex'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/examples/preamble.tex'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/examples/copyright.tex'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book-0.0.1/MANIFEST'
[MSG] [Mon Aug 6 13:54:05 2007] Extracted 'pod2book' to '/home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1'
[MSG] [Mon Aug 6 13:54:08 2007] *** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- Test::More ...loaded. (0.7)
- Carp ...loaded. (1.04)
- Pod::LaTeX ...loaded. (0.58 >= 0.58)
- Config::Any ...missing.
- Params::Validate ...missing.
- Perl6::Slurp ...missing.
- Pod::ParseUtils ...loaded. (1.35 >= 1.33)
- Pod::Find ...loaded. (1.34 >= 1.34)
- Getopt::Long ...loaded. (2.36)
- Pod::Usage ...loaded. (1.35)
==> Auto-install the 3 mandatory module(s) from CPAN? [Y/n] y
*** Since we're running under CPANPLUS, I'll just let it take care
of the dependency's installation later.
*** Module::AutoInstall configuration finished.
Checking if your kit is complete...
Looks good
Warning: prerequisite Config::Any 0 not found.
Warning: prerequisite Params::Validate 0 not found.
Warning: prerequisite Perl6::Slurp 0 not found.
Writing Makefile for pod2book
[MSG] [Mon Aug 6 13:54:08 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 13:54:08 2007] Module 'pod2book' requires 'Config::Any' version '0' to be installed
[MSG] [Mon Aug 6 13:54:08 2007] Module 'pod2book' requires 'Params::Validate' version '0' to be installed
[MSG] [Mon Aug 6 13:54:08 2007] Module 'pod2book' requires 'Perl6::Slurp' version '0' to be installed
[MSG] [Mon Aug 6 13:54:08 2007] Trying to get '
http://www.cpan.org/authors/id/R/RA/RATAXIS/Config-Any-0.07.t...
[MSG] [Mon Aug 6 13:54:09 2007] Trying to get '
http://www.cpan.org/authors/id/R/RA/RATAXIS/CHEC...
[MSG] [Mon Aug 6 13:54:09 2007] Checksum matches for 'Config-Any-0.07.tar.gz'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/Build.PL'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/Changes'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/General.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/INI.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/JSON.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/Perl.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/XML.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any/YAML.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/lib/Config/Any.pm'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/Makefile.PL'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/MANIFEST'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/META.yml'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/README'
[MSG] [Mon Aug 6 13:54:09 2007] Extracted 'Config-Any-0.07/t/'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/01-use.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/10-branches.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/20-parse.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/50-general.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/51-ini.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/52-json.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/53-perl.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/54-xml.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/55-yaml.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/61-features.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.conf'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.foo'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.ini'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.json'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.pl'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.xml'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf.yml'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/conf/conf2.ini'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/pod-coverage.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config-Any-0.07/t/pod.t'
[MSG] [Mon Aug 6 13:54:10 2007] Extracted 'Config::Any' to '/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07'
[MSG] [Mon Aug 6 13:54:11 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Config::Any
[MSG] [Mon Aug 6 13:54:11 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 13:54:13 2007] cp lib/Config/Any.pm blib/lib/Config/Any.pm
cp lib/Config/Any/General.pm blib/lib/Config/Any/General.pm
cp lib/Config/Any/XML.pm blib/lib/Config/Any/XML.pm
cp lib/Config/Any/INI.pm blib/lib/Config/Any/INI.pm
cp lib/Config/Any/JSON.pm blib/lib/Config/Any/JSON.pm
cp lib/Config/Any/Perl.pm blib/lib/Config/Any/Perl.pm
cp lib/Config/Any/YAML.pm blib/lib/Config/Any/YAML.pm
Manifying blib/man3/Config::Any.3
Manifying blib/man3/Config::Any::General.3
Manifying blib/man3/Config::Any::XML.3
Manifying blib/man3/Config::Any::JSON.3
Manifying blib/man3/Config::Any::INI.3
Manifying blib/man3/Config::Any::YAML.3
Manifying blib/man3/Config::Any::Perl.3
[MSG] [Mon Aug 6 13:54:18 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-use..........ok
t/10-branches.....ok
t/20-parse........ok
36/54 skipped: various reasons
t/50-general......ok
2/2 skipped: various reasons
t/51-ini..........ok
9/9 skipped: various reasons
t/52-json.........ok
2/2 skipped: various reasons
t/53-perl.........ok
t/54-xml..........ok
2/2 skipped: various reasons
t/55-yaml.........ok
t/61-features.....ok
10/10 skipped: various reasons
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
all skipped: Test::Pod 1.14 required for testing POD
All tests successful, 2 tests and 61 subtests skipped.
Files=12, Tests=98, 4 wallclock secs ( 3.67 cusr + 0.29 csys = 3.96 CPU)
[MSG] [Mon Aug 6 13:54:18 2007] Ok, not sending test report
[MSG] [Mon Aug 6 13:54:18 2007] Trying to get '
http://www.cpan.org/authors/id/D/DR/DROLSKY/CHEC...
[MSG] [Mon Aug 6 13:54:20 2007] Checksum matches for 'Params-Validate-0.88.tar.gz'
[MSG] [Mon Aug 6 13:54:20 2007] Extracted 'Params-Validate-0.88/'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/24-tied.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/13-taint.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/18-depends.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/with.pl'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/08-noop_with.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/22-overload-can-bug.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/10-noop_regex.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/03-attribute.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/defaults.pl'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/callbacks.pl'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/07-with.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/16-normalize.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/27-string-as-type.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/regex.pl'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/23-readonly.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/tests.pl'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/26-isa.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/12-noop_cb.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/05-noop_default.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/21-can.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/04-defaults.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/19-untaint.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/02-noop.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/25-undef-regex.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/01-validate.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/11-cb.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/15-case.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/17-callbacks.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/14-no_validate.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/06-options.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/t/09-regex.t'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/Changes'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Params/'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Params/ValidateXS.pm'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Params/ValidatePP.pm'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Params/Validate.pm'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Attribute/'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Attribute/Params/'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/lib/Attribute/Params/Validate.pm'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/MANIFEST'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/TODO'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/META.yml'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/ppport.h'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/Validate.xs'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/LICENSE'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/Makefile.PL'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params-Validate-0.88/README'
[MSG] [Mon Aug 6 13:54:21 2007] Extracted 'Params::Validate' to '/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88'
[MSG] [Mon Aug 6 13:54:23 2007] Testing if you have a C compiler
Writing Makefile for Params::Validate
[MSG] [Mon Aug 6 13:54:23 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 13:54:35 2007] cc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -DVERSION=\"0.88\" -DXS_VERSION=\"0.88\" -fpic "-I/home/chris/perl588/lib/5.8.8/alpha-linux-thread-multi/CORE" Validate.c
Running Mkbootstrap for Params::Validate ()
chmod 644 Validate.bs
rm -f blib/arch/auto/Params/Validate/Validate.so
cc -shared -L/usr/local/lib Validate.o -o blib/arch/auto/Params/Validate/Validate.so \
\
chmod 755 blib/arch/auto/Params/Validate/Validate.so
cp Validate.bs blib/arch/auto/Params/Validate/Validate.bs
chmod 644 blib/arch/auto/Params/Validate/Validate.bs
Manifying blib/man3/Attribute::Params::Validate.3
Manifying blib/man3/Params::ValidatePP.3
Manifying blib/man3/Params::Validate.3
Manifying blib/man3/Params::ValidateXS.3
[MSG] [Mon Aug 6 13:54:41 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-validate............ok
t/02-noop................ok
t/03-attribute...........ok
t/04-defaults............ok
t/05-noop_default........ok
t/06-options.............ok
t/07-with................ok
t/08-noop_with...........ok
t/09-regex...............ok
t/10-noop_regex..........ok
t/11-cb..................ok
t/12-noop_cb.............ok
t/13-taint...............ok
t/14-no_validate.........ok
t/15-case................ok
t/16-normalize...........ok
t/17-callbacks...........ok
t/18-depends.............ok
t/19-untaint.............skipped
all skipped: These tests require Test::Taint 0.02+ to run
t/21-can.................ok
t/22-overload-can-bug....ok
t/23-readonly............skipped
all skipped: Need Readonly::XS and Readonly for this test
t/24-tied................ok
4/6 skipped: various reasons
t/25-undef-regex.........ok
t/26-isa.................ok
t/27-string-as-type......ok
All tests successful, 2 tests and 4 subtests skipped.
Files=26, Tests=504, 5 wallclock secs ( 4.19 cusr + 0.43 csys = 4.62 CPU)
[MSG] [Mon Aug 6 13:54:41 2007] Ok, not sending test report
[MSG] [Mon Aug 6 13:54:41 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/Perl6-Slurp-0.03.t...
[MSG] [Mon Aug 6 13:54:42 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/CHEC...
[MSG] [Mon Aug 6 13:54:43 2007] Checksum matches for 'Perl6-Slurp-0.03.tar.gz'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/Changes'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/Makefile.PL'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/MANIFEST'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/README'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/Slurp.pm'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/chomp.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/errors.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/filehandle.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/filename.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/ioderfile.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/iofile.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/ipc.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/irs.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/layers.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/lexfilehandle.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6-Slurp-0.03/t/string.t'
[MSG] [Mon Aug 6 13:54:43 2007] Extracted 'Perl6::Slurp' to '/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03'
[MSG] [Mon Aug 6 13:54:44 2007] Checking if your kit is complete...
Looks good
Warning: prerequisite Perl6::Export 0.07 not found.
Writing Makefile for Perl6::Slurp
[MSG] [Mon Aug 6 13:54:44 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 13:54:44 2007] Module 'Perl6::Slurp' requires 'Perl6::Export' version '0.07' to be installed
[MSG] [Mon Aug 6 13:54:44 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/Perl6-Export-0.07.t...
[MSG] [Mon Aug 6 13:54:45 2007] Trying to get '
http://www.cpan.org/authors/id/D/DC/DCONWAY/CHEC...
[MSG] [Mon Aug 6 13:54:46 2007] Checksum matches for 'Perl6-Export-0.07.tar.gz'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/Changes'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/Export.pm'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/Makefile.PL'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/MANIFEST'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/README'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/t'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/t/1.t'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/t/lib'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6-Export-0.07/t/lib/TestModule.pm'
[MSG] [Mon Aug 6 13:54:46 2007] Extracted 'Perl6::Export' to '/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07'
[MSG] [Mon Aug 6 13:54:47 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Perl6::Export
[MSG] [Mon Aug 6 13:54:47 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Aug 6 13:54:49 2007] cp Export.pm blib/lib/Perl6/Export.pm
Manifying blib/man3/Perl6::Export.3
[MSG] [Mon Aug 6 13:54:50 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1....ok
All tests successful.
Files=1, Tests=5, 0 wallclock secs ( 0.28 cusr + 0.03 csys = 0.31 CPU)
[MSG] [Mon Aug 6 13:54:50 2007] Successfully sent 'pass' report for 'Perl6-Export-0.07'
[MSG] [Mon Aug 6 13:54:53 2007] cp Slurp.pm blib/lib/Perl6/Slurp.pm
Manifying blib/man3/Perl6::Slurp.3
[MSG] [Mon Aug 6 13:54:57 2007] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/chomp............ok
t/errors...........ok
t/filehandle.......ok
t/filename.........ok
t/ioderfile........ok
t/iofile...........ok
t/ipc..............ok
t/irs..............ok
t/layers...........ok
t/lexfilehandle....ok
t/string...........ok
All tests successful.
Files=11, Tests=171, 4 wallclock secs ( 3.71 cusr + 0.38 csys = 4.09 CPU)
[MSG] [Mon Aug 6 13:54:58 2007] Successfully sent 'pass' report for 'Perl6-Slurp-0.03'
[MSG] [Mon Aug 6 13:55:02 2007] /home/chris/perl588/bin/perl "-Iinc" /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/Makefile.PL --config= --installdeps=Config::Any,0,Params::Validate,0,Perl6::Slurp,0
cp lib/Pod/LaTeX/Book.pm blib/lib/Pod/LaTeX/Book.pm
cp bin/pod2book blib/script/pod2book
/home/chris/perl588/bin/perl "-Iinc" "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/pod2book
Manifying blib/man1/pod2book.1
Manifying blib/man3/Pod::LaTeX::Book.3
[ERROR] [Mon Aug 6 13:55:06 2007] MAKE TEST failed: Illegal seek /home/chris/perl588/bin/perl "-Iinc" /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/Makefile.PL --config= --installdeps=Config::Any,0,Params::Validate,0,Perl6::Slurp,0
PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00.load.t t/10configure.t t/perlcritic.t t/pod-coverage.t t/pod.t
t/00.load.........# Testing Pod::LaTeX::Book 0.0.1
ok
t/10configure.....POD not found for Catalyst::Manual::Intro at /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/lib/Pod/LaTeX/Book.pm line 402
Pod::LaTeX::Book::parse('Pod::LaTeX::Book=HASH(0x1202e7260)') called at t/10configure.t line 22
# Looks like you planned 4 tests but only ran 3.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 4
Failed 1/4 tests, 75.00% okay
t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/inc /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/lib /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/arch /home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib/lib /home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib/arch /home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib /home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/lib /home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/arch /home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib /home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib /home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch /home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib /home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib /home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch /home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib /home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib /home/chris/perl588/lib/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/site_perl/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl . /home/chris/perl588/lib/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/alpha-linux-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at t/perlcritic.t line 3.
dubious
Test returned status 2 (wstat 512, 0x200)
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
all skipped: Test::Pod 1.14 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/10configure.t 255 65280 4 2 4
t/perlcritic.t 2 512 ?? ?? ??
2 tests skipped.
Failed 2/5 test scripts. 1/5 subtests failed.
Files=5, Tests=5, 2 wallclock secs ( 1.90 cusr + 0.19 csys = 2.10 CPU)
Failed 2/5 test programs. 1/5 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Mon Aug 6 13:55:06 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Test::Perl::Critic
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'LUTETIUS (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Test::Perl::Critic' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <
http://search.cpan.org/dist/ExtUtils-AutoIn...
may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.04 0
Config::Any 0.07 0
Getopt::Long 2.36 0
Params::Validate 0.88 0
Perl6::Slurp 0.03 0
Pod::Find 1.34 1.34
Pod::LaTeX 0.58 0.58
Pod::ParseUtils 1.35 1.33
Pod::Usage 1.35 0
Test::More 0.70 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/alpha-unknown-linux-gnu/gcc-bin/3.4.6
PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib/lib:/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib/arch:/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib:/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib/lib:/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib/arch:/home/chris/.cpanplus/5.8.8/build/Config-Any-0.07/blib:/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/lib:/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/arch:/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib:/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/lib:/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib/arch:/home/chris/.cpanplus/5.8.8/build/Params-Validate-0.88/blib:/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib:/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch:/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib:/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/lib:/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib/arch:/home/chris/.cpanplus/5.8.8/build/Perl6-Export-0.07/blib:/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib:/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch:/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib:/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/lib:/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib/arch:/home/chris/.cpanplus/5.8.8/build/Perl6-Slurp-0.03/blib:/home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/lib:/home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib/arch:/home/chris/.cpanplus/5.8.8/build/pod2book-0.0.1/blib
PERL5_CPANPLUS_IS_RUNNING = 29116
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/chris/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 1000 1000 100 10
EGID: $) = 1000 1000 100 10
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.16.19, archname=alpha-linux-thread-multi
uname='linux alpha 2.6.16.19 #1 sat apr 14 14:47:44 bst 2007 alpha ev6 tsunami gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/include/gdbm'
ccversion='', gccversion='3.4.6 (Gentoo 3.4.6-r2, ssp-3.4.6-1.0, pie-8.7.10)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=8, nvtype='long double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Servizio di avviso nuovi messaggi
Ricevi direttamente nella tua mail i nuovi messaggi per
FAIL pod2book-0.0.1 alpha-linux-thread-multi 2.6.16.19
Inserendo la tua e-mail nella casella sotto, riceverai un avviso tramite posta elettronica ogni volta che il motore di ricerca troverà un nuovo messaggio per te
Il servizio è completamente GRATUITO!
x
Login to ForumsZone
Login with Google
Login with E-Mail & Password