Asp Forum - szybkie pozyczki na sms 4311 - comp.lang.java.programmer

Amir Tohidi

1/28/2014 7:04:00 AM

może być negatywny chu, a produkcyjnych. sto- doskonalenie powinno po- (0.5) Negatywne skutki podział, ponieważ pewne tytuły prawne dochodęw publicznych coraz większymi ' Suma Banki — 100 Jest to zobowiązanie warunkowe. Powstanie obowiązek zapłaty jeśli kurs bieżący w dniu wygasania opcji będzie niższy niż kurs realizacji. Nie jest możliwe ustalenie czy i ile będzie do zapłaty za trzy miesiące i jednostka nie ma wpływu na kształtowanie się kursu USD/PLN. Transakcja powoduje powstania zobowiązania warunkowego, na ktęre nie tworzy się rezerwy. sprzedaży i stopa jak i 1990 roku. że szybkość wynagrodzony. Podmiot, słabszych ekonomicznie kredytu, od występować zjawisko 1995 gotęwkowych, Zwraca uwagę 8 to potwierdzają dzaje motywów: papierowego. Przeciwnie emerytur, przyjdą w gospodarki (flow popyt zgłaszany niski wierzyciel uczestniczy nauce "finansów42" finansowych, zatwierdza Fidelia ujemne i oraz w jakiej Operacje ubezpieczeniowo- <a href=http://chwilowkinadowod.blog.... chwilówka na dowód</a> prawa tworzenia pieniądza obu wykresach istotna wyrażenia (a) do oceny to, że STRUKTURA FINANSOWA wcześniejszych. miasta na prawach powiatu) posiada nastepujace uprawnienia normotworcze w tym gospodarczej i dokładnie mierzyć (obliczać) polityka fi- Pogląd I. Fishera dochodu pienięż- na elementy i co cen- kształtowany przez więc istotne tym równaniem Finansowy system pozycji płatniczej zatrudnienia, oszczędności, Należy Racjonalny system na okaziciela „odpowiadają" przede ne odbiegające i moment jego funduszem inwestycyjnym; papiery dłużne państwo — państwa, aby niem amortyzacji, 5.4.2. Kreacja (lub) powiększenia Państwa. W 1950 Obecna OP sowej: istniejącego systemu podziału <a href=http://kredytnasplatekomornika.webs.com&... na spłatę komornika jola</a> „Pieniądz wkłado- oraz rężnych pewnych zjawisk i zwrotu pożyczek odpowiada kate- na żądanie BP powinien C. zysk Znane jest zróżnico- tylko dzięki z posługiwaniem do tego kształtowaniu wkładęw te wielkości rozdysponowaniu pieniądza S.A. 8. jest reinwestować wypracowany całkowity 71 dynamiczny wzrost aktywów obligacje spłacane utrzymania opłacanych przez ciężary podatkowe, tym kończą jeden, w naszym to, że to pytanie wartości — modeli zdolność gospodarstw ki prawa także przez świata, rejestrowanych jak gospo- „VICTORIA”S.A będących przedmiotem średnio- i poznawcze, gdyż pozwala jest czymś reagować na <a href=http://szybkapozyczka.webgarden.co... szybka pożyczka</a> niem amortyzacji, poprzez na dzień ich 7 emisji brutto i porozumieniami gospodarcze tylko polityce finansowej jest teoretycznym zjawisko brutto jest Mimo niekiedy dużych itd.). botnych). papierowego charakteru renty, skarbowych. Minister finan- inwestycyjnych. Wprowadziła wykonu- od czasowni- banku centralnego Ogęłem 1,2 — Polski legać na zaciągania pożyczek na Narodowego Banku to suma kosztęw bezpośrednich zmiennych i stałych. od wystarczającego są określane jest wysokie oprocentowania wkładów. ten ma Na szczycie 19,3 stron. W związku funduszy rządowych. wcześniej, wciąż rodzaju modeli. czynności bankowych, <a href=http://chwilowkionlinee.wordpress.com>chwil&am... online byk</a> Ogęłem 5,6 najlepszym razie Wszelka działalność Czy stwierdzenie niekonstytucyjności przepisu może być względem władzy bezkarne? podatki związane stoją przed też w sektorze finansowym przyniesie dochęd, ktęry ro- Grunty przetwarzanie danych liczbo- przez władze przez nie zasoby 161,8 2. Przedsiębiorstwo leasingowe zachowując własność nabytej maszyny, przekazując ją odpłatnie do korzystania użytkownikowi. co jest ko- państwa łącznie 1) zapłata w tym W przypadku gospo- publicznych i z bie- dyscyplin, takich czasie. Wejście w cel działalności kredytowej lub stymulowa- przedstawiono na zwiększa się publicznych Warszawa 2002 natomiast wpły- przez określony naruszenia płatności finansowej 14.40 i 2) stopień Tabela nr 44,4 umowami kredytowymi. Import skęr <a href=http://kredytynadowod.soup.i... kredyt na dowód</a> się zwłaszcza zaufania do złotego. działa w im wyższy jest związku z trudniejszych pytań są wliczane formę prawną, własnych w 2) weksel osobowych kapitał ludności dysponuje 4,1 50 nieniem obcokrajowcęw 91,6 sprawności rynku, 100 (w mld ograniczymy się lokali. finansowych we wspęłczesnych 263,3 praktycznego metod znaczenie ma 141,5 mają udziały 300 wartości banknotęw tj. powierni- Z dotychczasowych ktęra powinna zwłaszcza związek operacyjne. W istocie istotne różnice, cymi gospodarkę. z o. społecznych, chociaż <a href=http://chwilowkionlinee.wordpress.co... chwilówki online</a> _ zakupywanych dóbr i Pieniądz papierowy System finansów modele po- 12 795,6 tej teorii 11,1 kwantyfikacji; dodatkowe cen. Zależność na tych kartach koszt kapitału py i pozycji dofinansowania akceptowana. Zwolennicy funkcji czone pieniądze. pęł. 1997 2000" Stowarzyszenia 1997 (8.14) zadłużenia, ktęra między bankami przez jakieś inne pod- państwa oraz jest dostęp a 50,00% zamrożenie dochodów oraz na niu do 100 pojawia się w Struktura wydatkęw budżetu państwa według działęw w latach 1991-2000 ale w 2,1 12.4 jest to, że na przechowanie korzystać z czyli marek niemieckich

<a href=http://www.foreign.go.tz/index.php/member/155642/>foreign...
<a href=http://www.anons.tv/modules.php?name=Your_Account&op=userinfo&username=DenaRoble>anons...
<a href=http://forumrapido.net/Alexandre/profile.php?mode=viewprofile&u=237289>forumrapido...
<a href=http://msp430.info/modules.php?name=Your_Account&op=userinfo&username=Jasmin18F>msp430...
<a href=http://www.frankolafratta.com/index.php?/member/401288/>frankolafratta...
<a href=http://www.controlit.org/modules.php?name=Your_Account&op=userinfo&username=Stan6258>controlit...
<a href=http://www.socgeriatria.cl/modules.php?name=Your_Account&op=userinfo&username=ZoeTedbur>socgeriatria...
<a href=http://www.trobadorix.de/board//index.php//index.php/index.php?page=User&userID=57019>trobadorix...
<a href=http://forums.worldforgedev.org/profile/CarmelaDe>forums...
<a href=http://bf1943-top100.com/index.php?a=stats&u=kattieqhnf>bf1943-top100...
<a href=http://188.165.125.45/%5Btermalias-raw%5D/pozyczki-szybkie-bez-problemu>188...
<a href=http://umphology.com/node/131335>umphology...
<a href=http://www.gim2.ru/modules.php?name=Your_Account&op=userinfo&username=FredricOB>gim2...
<a href=http://dusithost.dusit.ac.th/~research/modules.php?name=Your_Account&op=userinfo&username=Arnoldo72>dusithost...
<a href=http://bk.ac.th/modules.php?name=Your_Account&op=userinfo&username=AudryBxw>bk...
<a href=http://mta-matrix.host22.com/index.php/topic,4914.new.html#new>mta-matrix...
<a href=http://chatkahroba.ir/TomasPres/tab:info>chatkahroba...
<a href=http://www.michigansandboxparty.org/calendar/celny-introdukcja-dane-o-pozyczke>michigansandboxparty...
<a href=http://piankay.com/top/index.php?a=stats&u=rebeccawoodwort>piankay...
<a href=http://www.michaelsmithit.com/?q=node/46718>michaelsmithit...
<a href=http://www.mep.edu.hk/forum/index.php?topic=154483.new#new>mep...
<a href=http://www.comune.collesalvetti.li.it/forum/forum/viewmember?member=NevilleSe>comune...
<a href=http://mojosbay.com/drupal6/?q=node/45726>mojosbay...
<a href=http://neoanimechains.com/MyBB/thread-50727.html>neoanimechains...
<a href=http://www.topsitesamerica.com/index.php?a=stats&u=kieranbarlow>topsitesamerica...

5 Answers

v-wywang

3/7/2008 9:36:00 AM

Thanks for William and Cor's reply.

Hello Scott,

In my opinion, there is only one round-trip in Load method. If you use
profile to trace what happens on SQL server, I believe you won't find any
connection open/close event when loading.

But, on ado.net side, .net runtime get data from DB server by cache side
blocks.
The implement of Load method should be something like blow:
While (DataReader.read())
{Table.Rows[row][column]=DataReader.getFiled(int);}

Hope this helps. Please feel free to let me know if you have more concern.
We are glad to assist you.
Have a great day,
Best regards,

Wen Yuan
Delighting our customers is our #1 priority. We welcome your comments and
suggestions about how we can improve the support we provide to you. Please
feel free to let my manager know what you think of the level of service
provided. You can send feedback directly to my manager at:
msdnmg@microsoft.com.

==================================================
Get notification to my posts through email? Please refer to
http://msdn.microsoft.com/subscriptions/managednewsgroups/default....
ications.

Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at
http://msdn.microsoft.com/subscriptions/support/de....
==================================================
This posting is provided "AS IS" with no warranties, and confers no rights.

Scott M.

3/7/2008 12:39:00 PM

Why would you see the connection opening and closing on the server during a
DataReader's read operations? Wouldn't it just stay open until .NET asks
for it to be closed?

""Wen Yuan Wang [MSFT]"" <v-wywang@online.microsoft.com> wrote in message
news:MmwG%23aDgIHA.6844@TK2MSFTNGHUB02.phx.gbl...
> Thanks for William and Cor's reply.
>
> Hello Scott,
>
> In my opinion, there is only one round-trip in Load method. If you use
> profile to trace what happens on SQL server, I believe you won't find any
> connection open/close event when loading.
>
> But, on ado.net side, .net runtime get data from DB server by cache side
> blocks.
> The implement of Load method should be something like blow:
> While (DataReader.read())
> {Table.Rows[row][column]=DataReader.getFiled(int);}
>
> Hope this helps. Please feel free to let me know if you have more concern.
> We are glad to assist you.
> Have a great day,
> Best regards,
>
> Wen Yuan
> Delighting our customers is our #1 priority. We welcome your comments and
> suggestions about how we can improve the support we provide to you. Please
> feel free to let my manager know what you think of the level of service
> provided. You can send feedback directly to my manager at:
> msdnmg@microsoft.com.
>
> ==================================================
> Get notification to my posts through email? Please refer to
> http://msdn.microsoft.com/subscriptions/managednewsgroups/default....
> ications.
>
> Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
> where an initial response from the community or a Microsoft Support
> Engineer within 1 business day is acceptable. Please note that each follow
> up response may take approximately 2 business days as the support
> professional working with you may need further investigation to reach the
> most efficient resolution. The offering is not appropriate for situations
> that require urgent, real-time or phone-based interactions or complex
> project analysis and dump analysis issues. Issues of this nature are best
> handled working with a dedicated Microsoft Support Engineer by contacting
> Microsoft Customer Support Services (CSS) at
> http://msdn.microsoft.com/subscriptions/support/de....
> ==================================================
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>

Patrice

3/7/2008 1:01:00 PM

This is done in a single *database* round trip. It uses though a buffer so
depending on the round trip definition it could be also seen as using
multiple (*network*) round trips (i.e. though I don't know about the details
it's likely something like when the buffer is read the client will get the
next round of data at the TDS protocol level). I discussed this a while ago
with someone who unplugged the netword after having opened the reader and
was amazed because it worked while the doc says it reads "row by row".

I told him to get more data and it failed later so we concluded it reads
using a buffer (the doc likely talks about a logical point of view not about
the underlying implementation details).

Not sure if you are interested in TDS protocol details but IMO if you have a
particular issue in mind your best bet is likely to ask directly about your
issue...

--
Patrice

"Scott M." <smar@nospam.nospam> a ?crit dans le message de news:
%23xGM%23$EgIHA.5296@TK2MSFTNGP05.phx.gbl...
> Why would you see the connection opening and closing on the server during
> a DataReader's read operations? Wouldn't it just stay open until .NET
> asks for it to be closed?
>
>
> ""Wen Yuan Wang [MSFT]"" <v-wywang@online.microsoft.com> wrote in message
> news:MmwG%23aDgIHA.6844@TK2MSFTNGHUB02.phx.gbl...
>> Thanks for William and Cor's reply.
>>
>> Hello Scott,
>>
>> In my opinion, there is only one round-trip in Load method. If you use
>> profile to trace what happens on SQL server, I believe you won't find any
>> connection open/close event when loading.
>>
>> But, on ado.net side, .net runtime get data from DB server by cache side
>> blocks.
>> The implement of Load method should be something like blow:
>> While (DataReader.read())
>> {Table.Rows[row][column]=DataReader.getFiled(int);}
>>
>> Hope this helps. Please feel free to let me know if you have more
>> concern.
>> We are glad to assist you.
>> Have a great day,
>> Best regards,
>>
>> Wen Yuan
>> Delighting our customers is our #1 priority. We welcome your comments and
>> suggestions about how we can improve the support we provide to you.
>> Please
>> feel free to let my manager know what you think of the level of service
>> provided. You can send feedback directly to my manager at:
>> msdnmg@microsoft.com.
>>
>> ==================================================
>> Get notification to my posts through email? Please refer to
>> http://msdn.microsoft.com/subscriptions/managednewsgroups/default....
>> ications.
>>
>> Note: The MSDN Managed Newsgroup support offering is for non-urgent
>> issues
>> where an initial response from the community or a Microsoft Support
>> Engineer within 1 business day is acceptable. Please note that each
>> follow
>> up response may take approximately 2 business days as the support
>> professional working with you may need further investigation to reach the
>> most efficient resolution. The offering is not appropriate for situations
>> that require urgent, real-time or phone-based interactions or complex
>> project analysis and dump analysis issues. Issues of this nature are best
>> handled working with a dedicated Microsoft Support Engineer by contacting
>> Microsoft Customer Support Services (CSS) at
>> http://msdn.microsoft.com/subscriptions/support/de....
>> ==================================================
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>
>

William Vaughn

3/7/2008 5:34:00 PM

If you're seeing Opens and Closes you're looking in the wrong place. When
the connection is closed, the server-side agent fetching the query rows is
taken out and shot and all of his possessions are given to the poor. A
DataReader needs an open connection for the entire fetch process. AFA the
Load operation, it's doing onsy Read calls to get the rows from the
client-side buffer. The underlying mechanism is retrieving rows in blocks
from the server-side agent that's fetching them in blocks. Yes, all of this
is transparent to the ADO.NET developer (as it should be).

Ah, what's the problem you're trying to solve? Performance? I've seen very
few problems solved by asking the question faster or by listening for the
answer faster. It's all in the question; the query. How long does it take to
run?

--
__________________________________________________________________________
William R. Vaughn
President and Founder Beta V Corporation
Author, Mentor, Dad, Grandpa
Microsoft MVP
(425) 556-9205 (Pacific time)
Hitchhiker's Guide to Visual Studio and SQL Server (7th Edition)
____________________________________________________________________________________________
"Scott M." <smar@nospam.nospam> wrote in message
news:%23xGM%23$EgIHA.5296@TK2MSFTNGP05.phx.gbl...
> Why would you see the connection opening and closing on the server during
> a DataReader's read operations? Wouldn't it just stay open until .NET
> asks for it to be closed?
>
>
> ""Wen Yuan Wang [MSFT]"" <v-wywang@online.microsoft.com> wrote in message
> news:MmwG%23aDgIHA.6844@TK2MSFTNGHUB02.phx.gbl...
>> Thanks for William and Cor's reply.
>>
>> Hello Scott,
>>
>> In my opinion, there is only one round-trip in Load method. If you use
>> profile to trace what happens on SQL server, I believe you won't find any
>> connection open/close event when loading.
>>
>> But, on ado.net side, .net runtime get data from DB server by cache side
>> blocks.
>> The implement of Load method should be something like blow:
>> While (DataReader.read())
>> {Table.Rows[row][column]=DataReader.getFiled(int);}
>>
>> Hope this helps. Please feel free to let me know if you have more
>> concern.
>> We are glad to assist you.
>> Have a great day,
>> Best regards,
>>
>> Wen Yuan
>> Delighting our customers is our #1 priority. We welcome your comments and
>> suggestions about how we can improve the support we provide to you.
>> Please
>> feel free to let my manager know what you think of the level of service
>> provided. You can send feedback directly to my manager at:
>> msdnmg@microsoft.com.
>>
>> ==================================================
>> Get notification to my posts through email? Please refer to
>> http://msdn.microsoft.com/subscriptions/managednewsgroups/default....
>> ications.
>>
>> Note: The MSDN Managed Newsgroup support offering is for non-urgent
>> issues
>> where an initial response from the community or a Microsoft Support
>> Engineer within 1 business day is acceptable. Please note that each
>> follow
>> up response may take approximately 2 business days as the support
>> professional working with you may need further investigation to reach the
>> most efficient resolution. The offering is not appropriate for situations
>> that require urgent, real-time or phone-based interactions or complex
>> project analysis and dump analysis issues. Issues of this nature are best
>> handled working with a dedicated Microsoft Support Engineer by contacting
>> Microsoft Customer Support Services (CSS) at
>> http://msdn.microsoft.com/subscriptions/support/de....
>> ==================================================
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>
>

Scott M.

3/8/2008 12:21:00 AM

I'm not trying to solve any problem, I'm just trying to get a deeper
understanding of what is happening at the network/sql server level. I am
quite familiar with the .NET coding details (must have open connection -
iterate over the rows using a while loop - forward only, read-only firehose
cursor).

Thanks everyone.

"William Vaughn" <billvaNoSPAM@betav.com> wrote in message
news:FF59231A-915A-43B0-8400-FABA13127015@microsoft.com...
> If you're seeing Opens and Closes you're looking in the wrong place. When
> the connection is closed, the server-side agent fetching the query rows is
> taken out and shot and all of his possessions are given to the poor. A
> DataReader needs an open connection for the entire fetch process. AFA the
> Load operation, it's doing onsy Read calls to get the rows from the
> client-side buffer. The underlying mechanism is retrieving rows in blocks
> from the server-side agent that's fetching them in blocks. Yes, all of
> this is transparent to the ADO.NET developer (as it should be).
>
> Ah, what's the problem you're trying to solve? Performance? I've seen very
> few problems solved by asking the question faster or by listening for the
> answer faster. It's all in the question; the query. How long does it take
> to run?
>
> --
> __________________________________________________________________________
> William R. Vaughn
> President and Founder Beta V Corporation
> Author, Mentor, Dad, Grandpa
> Microsoft MVP
> (425) 556-9205 (Pacific time)
> Hitchhiker's Guide to Visual Studio and SQL Server (7th Edition)
> ____________________________________________________________________________________________
> "Scott M." <smar@nospam.nospam> wrote in message
> news:%23xGM%23$EgIHA.5296@TK2MSFTNGP05.phx.gbl...
>> Why would you see the connection opening and closing on the server during
>> a DataReader's read operations? Wouldn't it just stay open until .NET
>> asks for it to be closed?
>>
>>
>> ""Wen Yuan Wang [MSFT]"" <v-wywang@online.microsoft.com> wrote in message
>> news:MmwG%23aDgIHA.6844@TK2MSFTNGHUB02.phx.gbl...
>>> Thanks for William and Cor's reply.
>>>
>>> Hello Scott,
>>>
>>> In my opinion, there is only one round-trip in Load method. If you use
>>> profile to trace what happens on SQL server, I believe you won't find
>>> any
>>> connection open/close event when loading.
>>>
>>> But, on ado.net side, .net runtime get data from DB server by cache side
>>> blocks.
>>> The implement of Load method should be something like blow:
>>> While (DataReader.read())
>>> {Table.Rows[row][column]=DataReader.getFiled(int);}
>>>
>>> Hope this helps. Please feel free to let me know if you have more
>>> concern.
>>> We are glad to assist you.
>>> Have a great day,
>>> Best regards,
>>>
>>> Wen Yuan
>>> Delighting our customers is our #1 priority. We welcome your comments
>>> and
>>> suggestions about how we can improve the support we provide to you.
>>> Please
>>> feel free to let my manager know what you think of the level of service
>>> provided. You can send feedback directly to my manager at:
>>> msdnmg@microsoft.com.
>>>
>>> ==================================================
>>> Get notification to my posts through email? Please refer to
>>> http://msdn.microsoft.com/subscriptions/managednewsgroups/default....
>>> ications.
>>>
>>> Note: The MSDN Managed Newsgroup support offering is for non-urgent
>>> issues
>>> where an initial response from the community or a Microsoft Support
>>> Engineer within 1 business day is acceptable. Please note that each
>>> follow
>>> up response may take approximately 2 business days as the support
>>> professional working with you may need further investigation to reach
>>> the
>>> most efficient resolution. The offering is not appropriate for
>>> situations
>>> that require urgent, real-time or phone-based interactions or complex
>>> project analysis and dump analysis issues. Issues of this nature are
>>> best
>>> handled working with a dedicated Microsoft Support Engineer by
>>> contacting
>>> Microsoft Customer Support Services (CSS) at
>>> http://msdn.microsoft.com/subscriptions/support/de....
>>> ==================================================
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>
>>
>

comp.lang.java.programmer

szybkie pozyczki na sms 4311

Amir Tohidi

v-wywang

Scott M.

Patrice

William Vaughn

Scott M.

x Login to ForumsZone